BASIC SPECS :

Logging
  • 250 MB internal logging memory
  • Optional USB logging to a removable storage device
    • Includes upgrade to 500MB internal memory
  • Logging rates up to 1000 samples per second
  • Fast Ethernet download
  • i2 Standard data analysis software included (Pro Analysis upgrade available)
Removable USB Storage Device Options
  • Kingston 32 GB USB3 Flash Drive - fast, low weight and low cost, not mechanically latched or waterproof.
  • MoTeC 32 GB USB3 Data Plug - mechanically latched, waterproof with anodised housing, ideal for exposure to the elements and vibration.

Alternative USB storage devices may be used but are not recommended.

Inputs

(*Denotes number available with I/O upgrade)

  • 10 (20*) analogue voltage inputs:
    • 4 (8*) 0 to 5.46 V, 1.33 mV resolution
    • 6 (12*) x 0 to 15.0 V, 3.66 mV resolution
  • 4 (8*) Analogue temperature inputs
    • 0 to 15.0 V, 3.66 mV resolution
  • 4 x Digital inputs
  • 2 x Switch inputs
  • 4 x Speed inputs
Outputs
  • 6 x low side outputs PWM or switched operation
  • 1.0 Amp max, current limited and thermal overload protected
Expanders
  • Compatible with E816, E888, VIM and SVIM Expanders.
Internal Sensors
  • 3-axis accelerometer, detection range: +/- 5G
  • Dash temperature sensor
  • Sensor supply voltage
  • Battery voltage
Communications
  • 4 x configurable CAN buses, with individually programmable CAN bus speeds. One can be used as RS232 Receive. Two buses support VIM/SVIM Expanders.
  • 2 x Dedicated RS232 ports.
Power supply
  • Operating voltage: 6 to 32 V DC
  • Operating current: 0.4 A typical at 14 V (excl. sensor currents)
  • Reverse battery protection
  • Battery transient protection
Sensor supply currents
  • 5 V sensor supply: 0.25 A maximum
  • 8 V sensor supply: 0.25 A maximum
Operating temperature
  • Internal: -20 °C to 80 °C
  • Typical ambient temperature range in free air: -20 °C to 65 °C
Physical
  • Size: 134.5 x 103.9 x 20.2 mm excluding connectors
  • Weight 350g
  • 1 x 79 pin Autosport connector
  • 1 x mini USB port (type B)
  • The device is rated to IP67 

    IP rating is dependant upon the user ensuring that the connector entries are waterproof, which, as a minimum, requires all unused wire cavities on the connector to be plugged.

FEATURES :

  • Suitable for bikes, cars, marine and industrial applications
  • Optional USB logging (includes 500 MB Internal Logging)
  • Supports T2 Telemetry (Optional)
  • Supports Wideband Lambda from MoTeC PLMs or LTCs
  • GPS Lap Timing
  • Tell Tales
  • Diagnostic Logging
  • Preserved Channels
  • Running Min/Max, Timers, PID Control, Engine Log
  • Easily integrates with MoTeC CAN based devices such as ECUs and expanders

BASIC SPECS :

Logging
  • 250 MB internal logging memory
  • Optional USB logging to a removable storage device
    • Includes upgrade to 500MB internal memory
  • Logging rates up to 1000 samples per second
  • Fast Ethernet download
  • i2 Standard data analysis software included (Pro Analysis upgrade available)
Removable USB Storage Device Options
  • Kingston 32 GB USB3 Flash Drive - fast, low weight and low cost, not mechanically latched or waterproof.
  • MoTeC 32 GB USB3 Data Plug - mechanically latched, waterproof with anodised housing, ideal for exposure to the elements and vibration.

Alternative USB storage devices may be used but are not recommended.

Inputs

(*Denotes number available with I/O upgrade)

  • 10 (20*) analogue voltage inputs:
    • 4 (8*) 0 to 5.46 V, 1.33 mV resolution
    • 6 (12*) x 0 to 15.0 V, 3.66 mV resolution
  • 4 (8*) Analogue temperature inputs
    • 0 to 15.0 V, 3.66 mV resolution
  • 4 x Digital inputs
  • 2 x Switch inputs
  • 4 x Speed inputs
Outputs
  • 6 x low side outputs PWM or switched operation
  • 1.0 Amp max, current limited and thermal overload protected
Expanders
  • Compatible with E816, E888, VIM and SVIM Expanders.
Internal Sensors
  • 3-axis accelerometer, detection range: +/- 5G
  • Dash temperature sensor
  • Sensor supply voltage
  • Battery voltage
Communications
  • 4 x configurable CAN buses, with individually programmable CAN bus speeds. One can be used as RS232 Receive. Two buses support VIM/SVIM Expanders.
  • 2 x Dedicated RS232 ports.
Power supply
  • Operating voltage: 6 to 32 V DC
  • Operating current: 0.4 A typical at 14 V (excl. sensor currents)
  • Reverse battery protection
  • Battery transient protection
Sensor supply currents
  • 5 V sensor supply: 0.25 A maximum
  • 8 V sensor supply: 0.25 A maximum
Operating temperature
  • Internal: -20 °C to 80 °C
  • Typical ambient temperature range in free air: -20 °C to 65 °C
Physical
  • Size: 134.5 x 103.9 x 20.2 mm excluding connectors
  • Weight 350g
  • 1 x 79 pin Autosport connector
  • 1 x mini USB port (type B)
  • The device is rated to IP67 

    IP rating is dependant upon the user ensuring that the connector entries are waterproof, which, as a minimum, requires all unused wire cavities on the connector to be plugged.

Brand MoTeC