The CDL3 Track Logging Kit is a cost-effective, plug and play Dash Logger solution that offers professional level features without the hassle of a customised installation. It provides a complete, race-ready display and data system that can be adapted and expanded to suit various applications.

CONNECTING THE KIT :

The CDL3 Track Logging Kit has a professional level, terminated loom that is pre-configured to get the most out of your CDL3. This loom plugs into the back of the CDL3, and has labelled wires for each of the devices that come with the kit. Follow these guidelines to connect the loom:

Power

Plug the cigarette lighter power adapter into a spare power supply socket. If your vehicle does not have a power supply socket, cut off the adapter, and connect the red wire to a fused 12V source and the black wire to chassis ground.

GPS

Ensure that you connect the GPS L10 unit only into the lead labelled “GPS”.Plugging a GPS into the SLM lead will damage the GPS.

Buttons

Plug in the button loom as supplied for alarm acknowledge (Red), next line (Green) and mode (Both buttons).

SLM

Connect your Shift Light Module to this lead only.

ECU

ECU communications are sent to the CDL3 via this connector. Terminated looms are available for OBD-II, MoTeC ‘hundred series’ ECUs and RS232 (M4, M48, M8 and other)RS232 connection may require an additional cable/adapter to be used in conjunction with the RS232 adapter.

Ethernet

For communications between your CDL3 and a PC for configuration