FEATURES :

• Impressive High Resolution 310 mm (approx. 12") colour LCD display
• High brightness for sunlight readability
• Optional internal logging and USB logging
• Suited to larger vehicles, marine and industrial applications
• Can replace the display cluster in modern vehicles
• Supports Wideband Lambda from MoTeC PLMs or LTCs
• Easily integrates with MoTeC CAN based devices such as ECUs and expanders. Full I/O expansion with E888 and E816
• GPS Lap Timing
• Supports T2 Telemetry (with upgrade)
• A composite video input allows for a live on-screen footage, for example from a rear view camera

BASIC SPECS :

Display

• Screen: Colour TFT LCD, anti-reflective
• Resolution: 1280 x 480 resolution, anti-aliased graphics
• Selectable fixed layouts include a dedicated live video window on the right side of the screen. Note: Video window is blank if no camera is connected; this area cannot be used for other channels in a fixed layout.
• Layouts: selectable fixed layouts (user programmable layouts via optional Display Creator software)
• 48 user-defined, scrollable message lines with programmable overrides
• 3 programmable modes with customisable labels

Logging - optional (requires upgrades)

• 120 MB internal logging memory
• USB logging to a removable storage device
• Logging rates up to 500 samples per second
• Fast Ethernet download
• i2 Standard data analysis software included (Pro Analysis upgrade available)

Removable USB Storage Device Options

• Kingston 32 GB USB3 Flash Drive - fast, low weight and low cost, not mechanically latched or waterproof.
• MoTeC 32 GB USB3 Data Plug - mechanically latched, waterproof with anodised housing, ideal for exposure to the elements and vibration.

• Alternative USB storage devices may be used but are not recommended.

Inputs

• 2 x Digital inputs
• 3 x Speed inputs
• 1 x Composite video input

Inputs - optional (requires I/O upgrade)

• 6 x Analogue voltage inputs
  • 4 x 0 to 5.46 V, 1.33 mV resolution
  • 2 x 0 to 15.0 V, 3.66 mV resolution
• 2 Analogue temperature inputs
  • 2 x 0 to 15.0 V, 3.66 mV resolution

Outputs - optional (requires I/O upgrade)

• 4 x low side outputs PWM or switched operation
• 0.5 Amp max, current limited and thermal overload protected

Expanders

• Compatible with E816 and E888 expanders (providing full functional use)

Internal Sensors

• 3-axis accelerometer, detection range: +/- 5G
• Dash temperature sensor
• Sensor supply voltage
• Battery voltage

Communications

• 2 x configurable CAN buses, with individually programmable CAN bus speeds.
• 2 x RS232 ports, one with transmit and receive, one with receive only.

Power supply

• Operating voltage: 6 to 32 V DC
• Operating current: 0.5 A typical at 14 V (excl. sensor currents)
• Reverse battery protection
• Battery transient protection

Sensor supply currents

• 5 V sensor supply: 0.25 A maximum
• 8 V sensor supply: 0.25 A maximum

Operating temperature

• Internal: -20 °C to 70 °C (above 60 °C maximum backlight brightness progressively reduced)
• Typical ambient temperature range in free air: -20 °C to 55 °C

Ingress Protection (IP) Rating

• The device is rated to IP67

IP rating is dependant upon the user ensuring that the connector entries are waterproof, which, as a minimum, requires all unused wire cavities on the connector to be plugged.

Physical

• Size: 340.8 x 144.1 x 34 mm excluding connector
• Weight 1690 g
• 1 x 34 pin waterproof connector
• 1 x mini USB port (located on the back of the device)