Mitsubishi

87 Products Found

14016 MOTEC DIFF CONTROLLER (MDC2) FOR MITSUBISHI LANCER EVO-X

14016 MOTEC DIFF CONTROLLER (MDC2) FOR MITSUBISHI LANCER EVO-X

MoTeC’s Mitsubishi Diff Controllers (MDC and MDC2) are suitable for Mitsubishi Lancer Evo models.

AUD $1,703.56

23395 MOTEC M1 CUSTOM FIRMWARE FOR MITSUBISHI LANCER EVO 4-9 (4G63)

23395 MOTEC M1 CUSTOM FIRMWARE FOR MITSUBISHI LANCER EVO 4-9 (4G63)

M1 CUSTOM FIRMWARE FOR EVO 4G63

AUD $1,730.56

23413 MOTEC M1 CUSTOM FIRMWARE FOR MITSUBISHI LANCER EVO 4-9 PADDLE SHIFT (4G63)

23413 MOTEC M1 CUSTOM FIRMWARE FOR MITSUBISHI LANCER EVO 4-9 PADDLE SHIFT (4G63)

M1 CUSTOM FIRMWARE FOR EVO 4G63 PADDLE SHIFT

AUD $2,271.36

23413U MOTEC M1 CUSTOM FIRMWARE FOR MITSUBISHI LANCER EVO 4-9 PADDLE SHIFT UPGRADE (4G63)

23413U MOTEC M1 CUSTOM FIRMWARE FOR MITSUBISHI LANCER EVO 4-9 PADDLE SHIFT UPGRADE (4G63)

M1 CUSTOM FIRMWARE FOR EVO 4G63 PADDLE SHIFT (UPGRADE)

AUD $892.32

23448 MOTEC M1 CUSTOM FIRMWARE FOR MITSUBISHI LANCER EVO-X PADDLE SHIFT (4B11)

23448 MOTEC M1 CUSTOM FIRMWARE FOR MITSUBISHI LANCER EVO-X PADDLE SHIFT (4B11)

M1 CUSTOM FIRMWARE FOR EVO-X 4B11 PADDLE SHIFT

AUD $2,271.36

23448U MOTEC M1 CUSTOM FIRMWARE FOR MITSUBISHI LANCER EVO-X PADDLE SHIFT UPGRADE (4B11)

23448U MOTEC M1 CUSTOM FIRMWARE FOR MITSUBISHI LANCER EVO-X PADDLE SHIFT UPGRADE (4B11)

M1 CUSTOM FIRMWARE FOR EVO-X 4B11 PADDLE SHIFT (UPGRADE)

AUD $892.32

23449 M1 CUSTOM FIRMWARE - MITSUBISHI LANCER EVO-X (4B11)

23449 M1 CUSTOM FIRMWARE - MITSUBISHI LANCER EVO-X (4B11)

M1 CUSTOM FIRMWARE FOR EVO-X 4B11

AUD $1,730.56

53121 MOTEC ONBOARD KNOCK MODULE FOR MITSUBISHI LANCER EVO-X (4B11)

53121 MOTEC ONBOARD KNOCK MODULE FOR MITSUBISHI LANCER EVO-X (4B11)

MoTeC's Onboard Knock Module (OKM) enables individual cylinder closed loop knock control on our M800 Plug-In ECUs.

AUD $570.15

61134 MOTEC LAMBDA LOOM FOR MITSUBISHI LANCER EVO-X

61134 MOTEC LAMBDA LOOM FOR MITSUBISHI LANCER EVO-X

AUD $74.74

61135 MOTEC KNOCK LOOM FOR MITSUBISHI LANCER EVO-X

61135 MOTEC KNOCK LOOM FOR MITSUBISHI LANCER EVO-X

AUD $50.04

61137 MOTEC CAN LOOM FOR MITSUBISHI LANCER EVO-X

61137 MOTEC CAN LOOM FOR MITSUBISHI LANCER EVO-X

AUD $87.42

ACL RACE MAIN BEARINGS FOR MITSUBISHI 4B11 (HX SIZE)

ACL RACE MAIN BEARINGS FOR MITSUBISHI 4B11 (HX SIZE)

Designed to withstand higher RPM conditions

AUD $220.00

ACL RACE MAIN BEARINGS FOR MITSUBISHI 4B11 (STD SIZE)

ACL RACE MAIN BEARINGS FOR MITSUBISHI 4B11 (STD SIZE)

Designed to withstand higher RPM conditions

AUD $220.00

ACL RACE MAIN BEARINGS FOR MITSUBISHI 4G63 (STD SIZE)

ACL RACE MAIN BEARINGS FOR MITSUBISHI 4G63 (STD SIZE)

Designed to withstand higher RPM conditions

AUD $220.00

ACL RACE ROD BEARINGS FOR MITSUBISHI 4B11 (STD SIZE)

ACL RACE ROD BEARINGS FOR MITSUBISHI 4B11 (STD SIZE)

Designed to withstand higher RPM conditions

AUD $165.00

ACL THRUST WASHER BEARING TDC FOR MITSUBISHI 4G63 (STD SIZE)

ACL THRUST WASHER BEARING TDC FOR MITSUBISHI 4G63 (STD SIZE)

Designed to withstand higher RPM conditions

AUD $22.00

ARP L19 HEAD STUDS FOR MITSUBISHI LANCER EVO 8-9 (4G63)

ARP L19 HEAD STUDS FOR MITSUBISHI LANCER EVO 8-9 (4G63)

ARP’s L19 material (comparable to A1 Technologies H11 Tool Steel)

AUD $542.00

ARP MAIN STUD KIT TO SUIT MITSUBISHI 4G63

ARP MAIN STUD KIT TO SUIT MITSUBISHI 4G63

ARP main studs are manufactured from 8740 chrome moly steel.

AUD $182.50

ATHENA CUT RING HEAD GASKET FOR MITSUBISHI LANCER EVO 4-9 (86.3mm x 1.3mm)

ATHENA CUT RING HEAD GASKET FOR MITSUBISHI LANCER EVO 4-9 (86.3mm x 1.3mm)

Athena Head Gasket for Mitsubishi EVO 4-9

AUD $434.50

ATHENA CUT RING HEAD GASKET FOR MITSUBISHI LANCER EVO-X (89mm x 1.2mm)

ATHENA CUT RING HEAD GASKET FOR MITSUBISHI LANCER EVO-X (89mm x 1.2mm)

Athena Head Gasket for Mitsubishi EVO-X

AUD $495.00

ATS CARBON TRIPPLE PLATE PULL CLUTCH KIT FOR MITSUBISHI LANCER EVO 4-9 (11,300kg)

ATS CARBON TRIPPLE PLATE PULL CLUTCH KIT FOR MITSUBISHI LANCER EVO 4-9 (11,300kg)

AUD $5,500.00

CANCHECKED MFD28 GEN2 2.8" DISPLAY GAUGE TO SUIT MITSUBISHI LANCER EVO-X (RHD)

CANCHECKED MFD28 GEN2 2.8" DISPLAY GAUGE TO SUIT MITSUBISHI LANCER EVO-X (RHD)

German made!

AUD $753.50

CUSTOM MOTEC C1212 DASH SURROUND FOR MITSUBISHI LANCER EVO 7-9

CUSTOM MOTEC C1212 DASH SURROUND FOR MITSUBISHI LANCER EVO 7-9

Custom surround suits the C1212 MoTec dash displays

AUD $550.00

DARTON SLEEVE KIT FOR MITSUBISHI 4B11

DARTON SLEEVE KIT FOR MITSUBISHI 4B11

Sleeve Kit for 4B11

AUD $1,425.00

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Powertune Australia’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘Powertune Australia’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is Unit 3 & 4, 32-34 Peter Brock Drive, Eastern Creek NSW 2766. Our ABN is 38 139 038 056. The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.