The L180 Enclosed Logger is a powerful control device and fully programmable data logger all in one compact unit. It comes standard with 250 MB internal memory and can be upgraded to USB Logging for additional data capacity and flexability. The USB Logging upgrade also increases the internal memory to 500 MB.

The L180 acquires data from other devices, such as an ECU, for logging and telemetry. It can be used in a wide range of applications as a standalone logger, or intergrated with other electronic devices such as displays and PDMs.

ACCESSORIES :

  • 62206 – L180 LOOM
  • 61279 – CABLE USB LOGGING 1.5M (PANEL MOUNT)
  • 61280 – 32 GB USB DATA PLUG
  • 61292 – 32 GB USB3 FLASH DRIVE
  • 61402 – 32 GB AUTOSPORT USB DATA PLUG
  • 61403 – CABLE, AUTOSPORT USB LOGGING 1.5M (PANEL MOUNT)

OPTIONAL UPGRADES :

  • 29702 – L180 44 I/O (see Specifications and Pinout)
    • 10 extra analogue voltage inputs (AV11 to AV20)
    • 4 extra analogue temperature inputs (AT5 to AT8)
  • 29715 – L180 500MB LOGGING + USB
  • 29721 – L180 PRO ANALYSIS
  • 29724 – L180 T2 TELEMETRY
  • 29706 – L180 ADVANCED FUNCTIONS
    • Advanced Maths
    • Channel Maths
    • 16 x 2D Tables (instead of 4)
    • 16 x 3D Tables (instead of 4)
    • 50 User conditions (instead of 20)

FEATURES :

  • Suitable for bikes, cars, marine and industrial applications
  • Optional USB logging (includes 500 MB Internal Logging)
  • Supports T2 Telemetry (Optional)
  • Supports Wideband Lambda from MoTeC PLMs or LTCs
  • GPS Lap Timing
  • Tell Tales
  • Diagnostic Logging
  • Preserved Channels
  • Running Min/Max, Timers, PID Control, Engine Log
  • Easily integrates with MoTeC CAN based devices such as ECUs and expanders

BASIC SPECS :

Logging
  • 250 MB internal logging memory
  • Optional USB logging to a removable storage device
    • Includes upgrade to 500MB internal memory
  • Logging rates up to 1000 samples per second
  • Fast Ethernet download
  • i2 Standard data analysis software included (Pro Analysis upgrade available)
Removable USB Storage Device Options
  • Kingston 32 GB USB3 Flash Drive - fast, low weight and low cost, not mechanically latched or waterproof.
  • MoTeC 32 GB USB3 Data Plug - mechanically latched, waterproof with anodised housing, ideal for exposure to the elements and vibration.

Alternative USB storage devices may be used but are not recommended.

Inputs

(*Denotes number available with I/O upgrade)

  • 10 (20*) analogue voltage inputs:
    • 4 (8*) 0 to 5.46 V, 1.33 mV resolution
    • 6 (12*) x 0 to 15.0 V, 3.66 mV resolution
  • 4 (8*) Analogue temperature inputs
    • 0 to 15.0 V, 3.66 mV resolution
  • 4 x Digital inputs
  • 2 x Switch inputs
  • 4 x Speed inputs
Outputs
  • 6 x low side outputs PWM or switched operation
  • 1.0 Amp max, current limited and thermal overload protected
Expanders
  • Compatible with E816, E888, VIM and SVIM Expanders.
Internal Sensors
  • 3-axis accelerometer, detection range: +/- 5G
  • Dash temperature sensor
  • Sensor supply voltage
  • Battery voltage
Communications
  • 4 x configurable CAN buses, with individually programmable CAN bus speeds. One can be used as RS232 Receive. Two buses support VIM/SVIM Expanders.
  • 2 x Dedicated RS232 ports.
Power supply
  • Operating voltage: 6 to 32 V DC
  • Operating current: 0.4 A typical at 14 V (excl. sensor currents)
  • Reverse battery protection
  • Battery transient protection
Sensor supply currents
  • 5 V sensor supply: 0.25 A maximum
  • 8 V sensor supply: 0.25 A maximum
Operating temperature
  • Internal: -20 °C to 80 °C
  • Typical ambient temperature range in free air: -20 °C to 65 °C
Physical
  • Size: 134.5 x 103.9 x 20.2 mm excluding connectors
  • Weight 350g
  • 1 x 79 pin Autosport connector
  • 1 x mini USB port (type B)
  • The device is rated to IP67 

    IP rating is dependant upon the user ensuring that the connector entries are waterproof, which, as a minimum, requires all unused wire cavities on the connector to be plugged.

Brand MoTeC

More From This Category