5-0 IGNITE TWIN CAM TRIGGER KIT FOR NISSAN RB (DIY W/CONNECTORS SUPPLIED)

Video Link: https://www.instagram.com/reel/CMu4MRBnIVU/?igshid=mu9tdv0orngw

Unless you haven't heard or experienced, Nissan motors with optical crank angle sensor mounted on the camshaft (RB, CA, VG, SR etc.) are notorious for ignition timing drift especially at high load, high power, high rpm and even more pronounced on RB30DET conversions. This is often caused by a combination of timing belt stretch, belt harmonics and worn out OEM CAS unit. Just ask any reputable Nissan tuner!

5-0 Ignite is proud to release our crank trigger kit for RB twin cam application which gives unparalleled accuracy of the crank shaft position against any other cam-only based system on the market.

Benefits includes tuner’s confidence in maximising ignition timing whilst keeping consistent safety margin for your high-powered RB build. Suitable for RB20 RB25 RB26 and RB30DET with twin cam heads. A MUST for all valued RB builds!

FEATURES :

It is STRONGLY recommended to power up the sensors via regulated power supply such as your ECU's 12V or 8V output.

Clean Slate ‘OEM’ Look CNC Machined Billet Aluminium 6061 Enclosed Cam Sensor Cover with Dress Up Washers
24 Plus 1 (24+1) Trigger Setup Compatible with Haltech Platinum Pro and Most Modern/Capable Aftermarket ECU
Genuine ZF (Cherry) Hall Effect Sensors for Both Crank and Cam Home
Integrated Trigger Teeth on Supplied Crank Timing Sprocket, Compatible with OEM and Most Aftermarket Balancer
5-0 Ignite Original Unique Design of Tapered Back Crank Trigger Teeth for Better Alignment to the Sensor and Crank Pulley Clearance Compared to Competitors!
Jacking Bolt Holes on the Crank Timing Sprocket for Ease of Future Removal
Design of the Cam Sensor Cover Allows +/- 3mm of Cam Pulley Thickness Variation Whilst Still Having the Key Within the Sensor Range
CNC Machined Billet Aluminium 6061 Crank Sensor Mount.
CNC Machined Billet Steel Crank Trigger Wheel and Cam Home Key, Zinc Plated For Corossion Resistance.
Wiring Connectors Supplied to Plug into OEM CAS Connector and Hall Effect Sensor (including replacement CAS Plug)
All Installation Fasteners Supplied
Full Instructions Supplied (refer to 'Installation Manual' tab above). Professional Installation is Highly Recommended.

Brand

5-0 Ignite

More From This Category

64003 MOTEC 2 & 3 BAR MAP SENSOR CONNECTOR (BLACK)

AUD $15.59

58005 MOTEC THERMOCOUPLE K-TYPE (EXPOSED)

AUD $114.25

57159 MOTEC LINEAR POTENTIOMETER WITH 250mm STROKE

AUD $527.52

53117 MOTEC DUAL MAG CONVERTER DMCC (GENERAL PURPO

AUD $107.69

55300 MOTEC ECU SENSOR KIT WITH 3 BAR MAP (TURBO)

AUD $256.90

59104 MOTEC 5 TURN STEERING SENSOR

AUD $130.36

POWERTUNE ETHANOL FLEX SENSOR KIT FOR TOYOTA YARIS

AUD $645.00

59103 MOTEC 10 TURN STEERING SENSOR

AUD $130.36

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Powertune Australia’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘Powertune Australia’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is Unit 3 & 4, 32-34 Peter Brock Drive, Eastern Creek NSW 2766. Our ABN is 38 139 038 056. The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

Description

Features

FEATURES :

Specifications

More From This Category

Terms & Conditions

Privacy Policy