FEATURES :

• Suitable for bikes, cars, marine and industrial applications
• 120MB internal logging memory
• GPS Lap Timing
• Supports Wideband Lambda from MoTeC PLMs or LTCs
• Easily integrates with MoTeC CAN based products such as ECUs and expanders
• Full I/O expansion available with use of E888, E816 expanders

BASIC SPECS :

Communications

• 2 x configurable CAN buses, with individually programmable CAN bus speeds.
  • One can be used as RS232 Receive
• 2 x dedicated RS232 ports
  • One with Transmit and Receive
  • One with Receive only

Inputs

(* available via I/O upgrade)

• 2 x digital inputs
• 3 x speed inputs
• 6* x analogue voltage inputs:
  • 4* x 0 to 5.46 V, 1.33 mV resolution
  • 2* x 0 to 15.0 V, 3.66 mV resolution
• 2* x analogue temperature inputs, 0 to 15 V, 3.66 mV resolution

Outputs

(* available via I/O upgrade)

• 4* x low side outputs PWM or switched operation
  • 0.5 A maximum, current limited and thermal overload protected

Logging

(available via upgrades)

• 120 MB internal logging memory
• Logging rates up to 500 samples per second
• Fast Ethernet download

Internal Sensors

• 3-axis accelerometer, detection range: +/- 5G
• Sensor supply voltage
• Battery voltage

Power supply

• Operating voltage: 6 to 32 V DC
• Operating current: 0.5 A typical at 14 V (excl. sensor currents)
• Reverse battery protection
• Battery transient protection

Sensor supply currents

• 5 V sensor supply: 0.25 A maximum
• 8 V sensor supply: 0.25 A maximum

Operating temperature

• Internal: -20 °C to 70 °C
• Typical ambient temperature range in free air: -20 °C to 55 °C

Physical

• Unit size: 134.5 x 103.9 x 20.2 mm excluding connector
• Weight 310 g
• 1 x 34 pin waterproof connector
• The device is rated to IP67 

  IP rating is dependant upon the user ensuring that the connector entries are waterproof, which, as a minimum, requires all unused wire cavities on the connector to be plugged.